Frame-Relay Multipoint with Sub-interface

R1 Configuration!!!!!!
!
interface GigabitEthernet0/0
 ip address 192.168.1.1 255.255.255.0
!

Frame-Relay ( Router As A Frame-Relay)

R1 Configuration!!!!!!
!
interface FastEthernet0/0
 ip address 192.168.1.1 255.255.255.0
!

Hot Standby Router Protocol (HSRP)

 R1 Configuration !!!!

interface FastEthernet0/0
 ip address 200.200.200.2 255.255.255.252

OSPF Authentication

R1 Configuration !!!!!

R1#
R2#configure terminal
R1(config)#interface GigabitEthernet 0/0
R1(config-if)#ip address 192.168.0.254 255.255.255.0
R1(config-if)#no shutdown

6 to 4 ( ipv4 over ipv6 tunneling )

R1 Configuration !!!!!

R1#
R1#configure terminal
R1(config)#interface ethernet 1/0
R1(config-if)#ip address 10.0.1.1 255.255.255.252
R1(config-if)#no shut
R1(config-if)#do write me
R1(config-if)#exit

BGP Basic

Router R1 Configuration !!!!!

R1>enable
R1#configure terminal
R1(config)#interface serial 1/0
R1(config-if)#ip address 200.200.200.1 255.255.255.252
R1(config-if)#no shut down
R1(config-if)#encapsulation ?
R1(config-if)#encapsulation ppp
R1(config-if)#do write me
R1(config-if)#exit

VLSM with EIGRP

R1 Configuration !!!!

R1>en
R1>enable
R1#configure terminal
R1(config)#interface fastEthernet 0/0
R1(config-if)# ip address 172.0.1.65 255.255.255.248
R1(config-if)#no shut

PPP Of CHAP Authentication

Server

Router>enable
Router#configure terminal
Router(config)#hostname R1
R1(config)#interface serial 1/0
R1(config-if)#encapsulation ppp
R1(config-if)#ppp authentication pap

EIGRP Redestribution of Different AS Number

R1 Configuration !!!!!

R1>enable
R1#configure terminal
R1(config)#interface ethernet 0/3/0
R1(config-if)#ip address 100.100.100.254 255.255.255.0

EIGRP on Cisco Router (Single AS)

R1 Configuration!!!!!

R1>
R1>enable
R1#configure terminal
R1(config)#interface ethernet 1/0
R1(config-if)#ip address 200.200.200.1 255.255.255.252

DHCP Relay Agent

R1 Configuration!!

R1>
R1>enable
R1#configure terminal
R1(config)#interface ethernet 1/2
R1(config-if)#ip address 200.200.200.5 255.255.255.252
R1(config-if)#do write me
Building configuration...
[OK]
R1(config-if)#exit
R1(config)#

RIPv2 (Routing Information Protocol Version 2)

R1 Configuration !!!

R1>
R1>enable
R1#configure terminal
R1(config)#interface fastEthernet 0/0

RIPv1 (Rounting Information Protocol Version 1)

R1 Configuration !!!
R1>
R1>enable
R1#configure terminal
R1(config)#interface fastEthernet 0/0
R1(config-if)#ip address 192.168.10.254 255.255.255.0
R1(config-if)#no shutdown

SSH on Cisco Router

Configure Cisco Router

Telnet on Cisco Router

Configure Cisco

 Configure Client

Read,Importance

 

ကြ်န္ေတာ္တို႔က ဒီ page ကိုလုပ္ရၿခင္းအေၾကာင္းအရင္းကို
က Discussion သေဘာမ်ိဳးေလးလုပ္ခ်င္လို႔ပါ။ Network သမားေတြအၿခင္း
ၿခင္းအၿပန္အလွန္ေဆြးေႏြးတိုင္ပင္ခ်င္တဲ့သေဘာပါ။ ကြ်န္ေတာ္တို႔က
admin ေတြပဲ ကိုတင္ခ်င္တဲ့ပို႔စ္ကိုယ့္ပါကိုယ္ တင္မယ္ဆိုတာမ်ိဳးမၿဖစ္ခ်င္
ပါဘူး။ အားလံုးကလဲ ကိုသိခ်င္တာပဲၿဖစ္ၿဖစ္ ကိုသိေနတာပဲၿဖစ္ၿဖစ္ ဝိုင္းၿပီး
ပါဝင္ေစခ်င္ပါတယ္။ အဲဒါမွလဲ ဒီ page ေလးကစည္စည္ကားကားေလးၿဖစ္
ၿပီးေလ့လာခ်င္တဲ့သူေတြအေနနဲ႔လဲအမ်ားၾကီးအဆင္ေၿပသြားနိုင္ပါတယ္။
ေနာက္ၿပီးေလ့လာေနတဲ့သူေတြကလဲကိုသိခ်င္ေနတဲ့အေၾကာင္းေတြကို
ေမးၿမန္းေစခ်င္ပါတယ္။ ကြ်န္ေတာ္တို႔တက္နိုင္သေလာက္ဝိုင္းၿပီးေဆြးေႏြး
တိုင္ပင္အေၿဖရွာၾကတာေပါ့ဗ်ာ။ ကြ်န္ေတာ္တို႔ကလဲ အဲဒီလိုေလ့လာေနတဲ့
သူေတြနဲ႔ အလုပ္မွာရွိေနတဲ့ Networking ၿပႆနာေတြကို ေဆြးေႏြးေၿဖရွင္း
ေပးခ်င္တာပါ။

အားလံုးအဆင္ေၿပေစခ်င္တဲ့ဆႏၵၿဖင့္................

 

ဒီ post ကုိ တင္ရျခင္းအေၾကာင္းအရင္းေလးက

Networking သမားမ်ားအတြက္ရည္ရြယ္ျခင္ျဖစ္ပါတယ္...

ကၽြန္ေတာ္လည္း.... Networking Student တစ္ေယာက္ပါ.....

အမွားမ်ားပါရင္လည္းခြင့္လြတ္ပါ...

ၾကိဳက္တယ္ဆုိရင္ Share and Comment မ်ားေပးၾကပါ...

လုိအပ္မည္႕မ်ားကုိလည္း Comment မ်ားေပးၾကပါ...

Question မ်ားလည္း ေမးႏုိင္ပါတယ္.....

ေလွာင္ေျပာင္ရန္ ၊ တင္ထားျခင္းမဟုတ္ပါ.....

Juniper ssg20 Default username and passwd

SSG20 Default IP:

192.168.1.1

SSG20 Default Password:

netscreen

SSG20 Default Username:

netscreen

Comment!!!!!!!!!
Thanks!!!!!!!!!!!
 

Juniper SSG20 Configure IP

Connection
- Connect RJ45 cable from the Console Port to a switch or router in the Trust Zone (Computer1 – Using a RJ45DB9 adapter)
- Connect RJ45 cable from the eth0/0 Port to a switch or router in W1 (Computer1Ethernet port)
- Connect RJ45 cable from the eth0/0 Port to a switch or router in W2 (Computer2Ethernet
port)

Configuration
- Open your CLI, and enter default user and password
- Unset default settings.
unset interface bgroup0 port eth0/2
unset interface bgroup0 port eth0/3
unset interface bgroup0 port eth0/4
unset interface bgroup0 ip
RJ45DB9 adapter
- Set the eth0/0
set interface eth0/0 zone trust
set interface eth0/0 192.168.1.254/24
- Set the eth0/1
set interface eth0/1 zone trust
set interface eth0/1 192.168.2.254/24
- To confirm
get int

Comment!!!!!!!!!
Thanks!!!!!!

Cisco Router Backup and Restore

For Backup

R1>enable
R1#configure terminal
R1(config)#interface fastEthernet 0/0
R1(config-if)#ip address 10.1.1.1 255.255.255.0
R1(config-if)#no shut
R1(config-if)#do write me
R1(config-if)#exit
R1#ping 10.1.1.2         <------ping for TFTP SERVER
R1#copy tftp: startup-config
Address or name of remote host []? 10.1.1.2
Source filename [ ]? Startup-config    <------ Backet name (fill full name)
Destination filename [startup-config]?     <------ enter
R1#

Cisco Router On DHCP

R1 Configuration !!!

R1>enable
R1#configure terminal
R1(config)#interface fastEthernet 0/0
R1(config-if)#ip add 192.168.10.254 255.255.255.0
R1(config-if)#no shut
R1(config-if)#do write me
R1(config)#interface fastEthernet 0/1
R1(config-if)#ip add 172.16.20.254 255.255.255.0

Default Route

R1 Configuration !!!

R1>enable
R1#configure terminal
R1(config)#interface fastEthernet 0/0
R1(config-if)#ip add 200.200.200.1 255.255.255.252
R1(config-if)#no shut
R1(config-if)#exit

Network Route

R1 Configuration !!!

R1>enable
R1#configure terminal
R1(config)#interface fastEthernet 0/0
R1(config-if)#ip add 200.200.200.1 255.255.255.252
R1(config-if)#no shut
R1(config-if)#exit
R1(config)#interface fastEthernet 0/1

Static Route

R1 Configuration !!!

R1>enable
R1#configure terminal
R1(config)#interface fastEthernet 0/0
R1(config-if)#ip add 200.200.200.1 255.255.255.252
R1(config-if)#no shut
R1(config-if)#exit
R1(config)#interface fastEthernet 0/1
R1(config-if)#ip add 172.16.10.254 255.255.255.0
R1(config-if)#no shut

Inter VLAN Rounting

Router Configuration

R1#vlan database
R1(vlan)#vlan 10
R1(vlan)#vlan 20
R1(vlan)#exit
R1(config)#interface fastEthernet 0/0.10